Table of Contents
Installing an Invidia exhaust on your Nissan 370Z can significantly enhance its performance and sound. This step-by-step guide will walk you through the process, ensuring a smooth installation even if you’re a beginner.
Tools and Materials Needed
- Invidia Exhaust System
- Socket Wrench Set
- Jack and Jack Stands
- WD-40 or Penetrating Oil
- Rubber Mallet
- Safety Gloves and Glasses
Preparation
Start by parking your Nissan 370Z on a flat surface and engaging the parking brake. Use the jack to lift the rear of the vehicle and secure it with jack stands. Wear safety gloves and glasses to protect yourself during the process.
Apply WD-40 or a similar penetrating oil to the exhaust clamps and bolts to loosen any rust or corrosion. Allow it to sit for a few minutes before proceeding.
Removing the Old Exhaust
Locate the stock exhaust system’s clamps and bolts. Use the socket wrench to carefully loosen and remove these fasteners. Gently tap the exhaust components with a rubber mallet if they are stuck.
Carefully detach the old exhaust from the exhaust manifold and muffler. Be mindful of any remaining clamps or hangers that might need to be removed or adjusted.
Installing the Invidia Exhaust
Align the Invidia exhaust system with the exhaust manifold and muffler connections. Slide the components into place, ensuring a snug fit. Use new clamps if provided, or reuse the old ones if they are in good condition.
Hand-tighten the clamps and bolts initially, then use the socket wrench to securely tighten them. Check all connections to prevent leaks and rattles.
Final Checks and Test Drive
Lower the vehicle from the jack stands carefully. Start your engine and listen for any exhaust leaks or unusual noises. Take the car for a short test drive to ensure everything is functioning properly.
After confirming proper operation, double-check all fasteners and clamps. Tighten if necessary to maintain a secure fit.
Enjoy your new Invidia exhaust and the improved sound and performance it provides!