Table of Contents
If you want to upgrade your car’s exhaust with a square tip, the first step is to measure the exhaust opening accurately. Proper measurement ensures a perfect fit and a professional look. This guide provides clear, step-by-step instructions to help you measure your car’s exhaust opening correctly.
Tools Needed
- Measuring tape or ruler
- Chalk or marker
- Paper and pen for notes
- Optional: flashlight for better visibility
Step 1: Prepare Your Vehicle
Park your car on a flat surface and turn off the engine. Ensure the exhaust area is cool to avoid burns. If necessary, use a flashlight to clearly see the opening, especially if it’s in a hard-to-see location.
Step 2: Locate the Exhaust Opening
Find the exhaust pipe’s opening at the rear of your vehicle. It may be circular or oval, but for a square tip, you’ll need to measure the opening directly. Clean around the area if dirt or debris obstructs your view.
Step 3: Measure the Width and Height
Using your measuring tape or ruler, measure the width and height of the exhaust opening at its widest points. For a square tip, these measurements should be very close, but measure both to confirm. Record the measurements in inches or centimeters.
Step 4: Check for Uniformity
Ensure the opening is roughly square by comparing the width and height measurements. If they differ significantly, the opening may be rectangular, and you should measure accordingly or consider a different tip shape.
Step 5: Measure the Depth (Optional)
If you want a snug fit, measure the depth of the exhaust opening from the edge inward. This helps determine the length of the square tip that will fit properly without protruding too much or being too shallow.
Step 6: Record and Confirm Measurements
Write down all measurements clearly. Double-check each measurement to ensure accuracy. Accurate measurements are crucial for selecting the right size square tip for your exhaust.
Final Tips
- Measure at multiple points if the opening isn’t perfectly round or square.
- Consult your car’s manual or a professional if unsure about measurements.
- Choose a square tip that slightly exceeds your measurements for a secure fit.
By following these steps, you’ll be able to measure your car’s exhaust opening accurately and select the perfect square tip for a sleek, custom look. Happy upgrading!