Table of Contents
Installing a Borla Touring Exhaust on your Lexus RX can enhance its performance and sound. This guide provides a clear, step-by-step process to help you complete the installation safely and efficiently.
Tools and Materials Needed
- Socket set and ratchet
- Jack and jack stands
- WD-40 or penetrating oil
- Exhaust hanger removal tool
- New Borla Touring Exhaust system
- Safety gloves and goggles
Preparation Steps
Begin by parking your Lexus RX on a flat surface. Engage the parking brake and turn off the engine. Use the jack to lift the vehicle and secure it with jack stands. Wear safety gear to protect yourself during the process.
Apply WD-40 or penetrating oil to the existing exhaust clamps and hangers to loosen rust and make removal easier. Allow a few minutes for the lubricant to work.
Removing the Old Exhaust
Locate the exhaust clamps and hangers holding the current exhaust system. Use the socket set to loosen and remove the clamps. Carefully detach the exhaust from the hangers using the exhaust hanger removal tool.
Gently remove the old exhaust system from under the vehicle. Set it aside for disposal or recycling.
Installing the Borla Touring Exhaust
Position the new Borla Touring Exhaust under the vehicle, aligning it with the existing mounting points. Attach the exhaust to the hangers first to ensure proper fit.
Secure the exhaust with the provided clamps, tightening them with the socket set. Make sure all connections are firm and leak-free.
Final Checks and Testing
Lower the vehicle carefully and remove the jack stands. Start the engine and listen for any exhaust leaks or unusual sounds. Check all clamps and hangers to ensure everything is secure.
Take your Lexus RX for a short test drive to confirm the exhaust is functioning properly and that there are no rattles or leaks. Enjoy the improved sound and performance of your new Borla Touring Exhaust!