Table of Contents
Replacing the OEM exhaust on your Honda Accord with a K&N Performance Exhaust can enhance your vehicle’s sound, improve performance, and give it a sportier look. This guide will walk you through the process step-by-step, ensuring a smooth upgrade experience.
Tools and Materials Needed
- Socket set and ratchet
- WD-40 or penetrating oil
- Jack and jack stands
- Wrench set
- New K&N Performance Exhaust kit
- Safety gloves and goggles
- Exhaust hanger removal tool (optional)
Preparation
Start by parking your Honda Accord on a flat surface. Engage the parking brake and wear safety gear. Use the jack to lift the vehicle and secure it with jack stands. Locate the exhaust system underneath your car, which runs from the engine to the rear bumper.
Removing the Old Exhaust
Apply WD-40 to the bolts and clamps connecting the exhaust sections to loosen rust and debris. Use the socket set and wrenches to carefully remove the clamps and bolts securing the OEM exhaust. Gently detach the exhaust from the hangers, using an exhaust hanger removal tool if needed. Carefully lower the old exhaust and set it aside.
Installing the K&N Performance Exhaust
Compare the new K&N exhaust components with the old system to ensure proper fitment. Attach the new exhaust to the hangers first, then connect the sections using the provided clamps and bolts. Tighten all connections securely, making sure the exhaust is properly aligned and not touching any parts of the vehicle.
Final Checks
Lower the vehicle carefully and start your engine. Listen for any exhaust leaks or rattling noises. Inspect all connections to ensure they are tight and secure. If necessary, tighten bolts or adjust the positioning of the exhaust.
Conclusion
Replacing your OEM exhaust with a K&N Performance Exhaust on your Honda Accord can be a rewarding upgrade that boosts performance and sound. Always follow safety procedures during installation, and consult your vehicle’s manual for specific details. Enjoy your enhanced driving experience!