Table of Contents
Installing a Borla S-Type Exhaust on your Chevrolet Camaro can enhance both the sound and performance of your vehicle. While it requires some mechanical skills, with the right tools and patience, you can complete this DIY project at home. This guide will walk you through the steps to install your new exhaust system safely and effectively.
Tools and Materials Needed
- Socket set and ratchet
- WD-40 or penetrating oil
- Jack and jack stands or ramps
- Exhaust hangers removal tool
- Torque wrench
- Safety gloves and eye protection
- Borla S-Type Exhaust Kit
Preparation
Start by parking your Camaro on a flat surface and engaging the parking brake. Use the jack to lift the front or rear of the vehicle and secure it with jack stands or drive it onto ramps. Wear safety gloves and eye protection to prevent injuries during the process. Apply WD-40 to the bolts and hangers to loosen rust and corrosion, making removal easier.
Removing the Old Exhaust
Locate the existing exhaust system under your Camaro. Use the socket set to loosen and remove the clamps and bolts securing the exhaust to the catalytic converter and muffler. Carefully detach the exhaust hangers using the exhaust hanger removal tool. Support the exhaust as you remove it to prevent it from falling and causing damage.
Installing the Borla S-Type Exhaust
Position the new Borla S-Type Exhaust in place, aligning it with the catalytic converter and the mounting points. Attach the exhaust clamps loosely at first to allow adjustments. Once properly aligned, tighten all clamps and bolts to the manufacturer’s specified torque using the torque wrench. Ensure all hangers are securely holding the exhaust in place.
Final Checks and Tips
Lower your vehicle and start the engine to check for leaks or rattling noises. Listen for a deeper, more aggressive exhaust tone. If needed, tighten any loose clamps. Always double-check that all bolts and clamps are securely fastened to avoid any issues during driving.
Conclusion
With patience and the right tools, installing a Borla S-Type Exhaust on your Chevrolet Camaro is a rewarding DIY project that can improve your vehicle’s sound and performance. Remember to follow safety precautions and consult your vehicle’s manual for specific torque specifications. Enjoy your upgraded ride!